We are happy to announce an update for all Echo tools! These new versions introduce new functionalities such as support for more 5G parameters, improved map zoom, more detailed call failure detection and synchronization of custom views via Cloud, and various other minor improvements.
Due to our lossless log file format, the new parameters and call state analysis works also on all old files when performing analysis with the new Studio version.
For more details on the changes, please find full version histories below.
Echo One 3.1.17, Echo Plus 3.1.17, and Echo FT 3.1.17
- Improved logic for detecting call setup failure
- Added additional NR 5G band support with PCTEL scanners (n53, n89, n91, n92, n93, n94, n95)
- Added sweep count option to the configuration on spectrum scans. Sweep count is used to returning an average value for multiple sweeps instead of a single pass reading
- Added parsing of UMTS Cell Id, Cell Barred, Ura Id, and Max Tx in HiSilicon chipset phones
- Increased maximum zoom in outdoor map for better usability
- Replaced selection of scan bandwidth in spectrum scan allowing only applicable bandwidths to be selected. This makes it easier to configure the scan
- Added functionally to select or deselect all bands for the given system when doing scanner auto-detection
- Added LTE QCI parameter
- Added parameter for 5G PUSCH throughput
- Added parameter for 5G PDSCH TTI rate
- Added possibility to publish view configurations to Cloud. This enables different members of a team to work efficiently with the same views without having to set the views individually on each device
- Added routing of license release via controller if the network connection is down*
- Fixed UMTS RSCP not showing with newer phone models
- Fixed dial dialog to accept numbers starting with *
- Fixed LTE M-TMSI not updating
- Fixed voice call state not updating in HiSilicon chipset phones
- Fixed bug in GPS data on DLF file format*
*Not included in Echo FT
Echo Lite 3.1.17
- Improved logic for detecting call setup failure
- Added additional NR 5G band support with PCTEL scanners (n53, n89, n91, n92, n93, n94, n95)
- Added sweep count option to the configuration on spectrum scans. Sweep count is used to returning an average value for multiple sweeps instead of a single pass reading
- Increased maximum zoom in outdoor map for better usability
- Replaced selection of scan bandwidth in spectrum scan allowing only applicable bandwidths to be selected. This makes it easier to configure the scan.
- Added functionally to select or deselect all bands for the given system when doing scanner auto-detection
- Added possibility to publish view configurations to Cloud. This enables different members of a team to work efficiently with the same views without having to set the views individually on each device
- Added routing of license release via controller if the network connection is down
- Fixed dial dialog to accept numbers starting with
- Added more details to the network panel
- Added GSM TA and BSIC parameters
Echo Studio 3.1.17
- Added additional NR 5G band support with PCTEL scanners (n53, n89, n91, n92, n93, n94, n95)
- Added sweep count option to the configuration on spectrum scans. Sweep count is used to returning an average value for multiple sweeps instead of a single pass reading
- Added parsing of UMTS Cell Id, Cell Barred, Ura Id, and Max Tx in HiSilicon chipset phones
- Added parameter for 5G PUSCH throughput
- Increased maximum zoom in outdoor map for better usability
- Replaced selection of scan bandwidth in spectrum scan allowing only applicable bandwidths to be selected. This makes it easier to configure the scan.
- Added LTE QCI parameter
- Fixed bug in GPS data on DLF file format
- Fixed UMTS RSCP not showing with newer phone models
- Fixed LTE M-TMSI not updating
- Fixed voice call state not updating in HiSilicon chipset phones
- Added possibility to select the specific network interface
- Added possibility to geo-locate own location
- Added support for YouTube and Traceroute tests
- Added location pin to be shown for the route on lower zoom levels
- Added support for ping, iperf3, and speedtest data tests
- Added sorting to test and script selection dialogs
- Added possibility to send AT commands to the modem
- Added possibility to transfer files through remote control
- Improved logic for detecting call setup failure
- Fixed an issue adding PCTEL scanner manually
- Fixed measurement autostart not working via Cloud
- Fixed GPS speed resetting between results in playback
- Fixed problem of auto-detect scans not registering correctly with MXFlex scanner
- Fixed frequency spacing problems that occurred in UI on some configurations when using EPS and spectrum scans
- Fixed problem in saving python KPIs
- Fixed 5G PDSCH TTI not showing in the chart
The new version will be pushed to Cloud shortly and it will be offered as an automatic update.
Please note that on some Windows PCs we have seen the auto-update fail. Users with this issue are required to uninstall and install the software. No user data will be removed on uninstall. We apologize for any inconvenience.
Happy updating!
Enhancell team.